My Garage
My Account
Cart
Genuine Cadillac Fleetwood Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
25 Parking Brake Cables found
Cadillac Fleetwood Cable Assembly, Parking Brake Rear
Part Number: 3530494$18.95 MSRP: $29.00You Save: $10.05 (35%)Ships in 1-2 Business DaysCadillac Fleetwood Cable Assembly, Parking Brake Intermediate
Part Number: 25530397$53.59Ships in 1-2 Business Days
| Page 1 of 2 |Next >
1-20 of 25 Results
Cadillac Fleetwood Parking Brake Cable
Parking Brake Cable in Cadillac Fleetwood particularly plays an important role in the parking brakes system and is tasked with the responsibility of making the parked vehicle not to move especially if parked on a slope. This cable connects the parking brake which is also termed as the emergency brake or the hand brake to the main braking system to offer safety. At some point in Cadillac Fleetwood, it has been using different design and type of Parking Brake Cable. A worn stretched Parking Brake Cable make it rather difficult for the parking brake to engage properly while a 'broke' cable actually means you don't have a parking brake system at all which of course may have safety implications. It is necessary to provide constant care for the Parking Brake Cable so that the parking brake works correctly and does not cause problems for the owner, for example, the parking brake light comes on due to the breakdown of the cable.
Each OEM Cadillac Fleetwood Parking Brake Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Cadillac Fleetwood Parking Brake Cable Parts Questions & Experts Answers
- Q: How do you remove and install the Parking Brake Cable on Cadillac Fleetwood?A: For front cable on 1990-93 Deville and Fleetwood, it requires raising and safely supporting the vehicle and loosening the adjuster and removing the cable from adjuster and then removing the retaining nut from under body. Lower the vehicle and disconnected the cable from the lever assembly. During installation the cable is connected to the lever assembly then the vehicle is raised again, the cable is secured and the cable retainer nut is tightened to 22ft/lbs. Tighten the nut and the cable to 30 Nm, connect the cable with the adjuster, adjust the parking brake cable and lower the vehicle. For the intermediate cable, lift the car and unbolt the cable from the adjuster; removal procedure differs for 1990-91 and 1992-93 cars. Fitting includes mating the cable to the rear equalizer then clipping onto it and / or onto retainers and fine tuning the parking brake cable. For rear cables, raising and supporting the vehicle, back the adjuster nut, removing the wheel and Brake Drum, disconnecting the cable from the brake shoes parking brake lever, and removing the conduit fitting. For left and right rear cables only on 1990 vehicles perform left and right rear cables step, and for all others remove the cable from the equalizer then install in this manner. For 1994-98 Deville, lift the car, remove front cable from the intermediate cable, and un-clip the cable housing retainer, then lower the car, remove the left dash close-out panel, disconnect the cable from the pedal assembly, and then remove it. Installation comprises of placing the cable as a main component, fixing it onto the pedal assembly as well as ensuring that it links with the intermediate cable as required. For the intermediate cable, lift the car and place it on jack stands, remove the front cable clip, then unplug the front end, remove the adjuster of the rear end, disconnect the rear ends then fix the new cable securely. For rear cables, lift up the car, remove the wheel, use a wrench and remove the cable from the adjuster, disconnect the cables from the equalizer and finally detach the cable from the caliper. They are fitting of cable in the retainers, fixing of the cable in the caliper, and arrangement of the parking brake cable. For adjustment on Deville and Fleetwood, the brake shoes must be adjusted and apply and release the parking brake four or five times, parking brake pedal should be checked for full release and adjust the cable until a 3/16th drill bit fits. For Eldorado and Seville turn on the service brake, fully engage the parking brake, check to ensure that the parking brake is released completely, lift the car, check position of the parking brake levers, tighten the cable at the adjuster, and confirm that both levers are resting of the stops after adjustment.
Related Cadillac Fleetwood Parts
Browse by Year
1996 Parking Brake Cable 1995 Parking Brake Cable 1994 Parking Brake Cable 1993 Parking Brake Cable 1992 Parking Brake Cable 1991 Parking Brake Cable 1990 Parking Brake Cable 1989 Parking Brake Cable 1988 Parking Brake Cable 1987 Parking Brake Cable 1986 Parking Brake Cable 1985 Parking Brake Cable 1984 Parking Brake Cable 1983 Parking Brake Cable 1982 Parking Brake Cable