My Garage
My Account
Cart
Genuine Cadillac Fleetwood Brake Master Cylinder
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Brake Master Cylinders found
Cadillac Fleetwood Cylinder Asm,Brake Master
Part Number: 18060068$103.61 MSRP: $322.48You Save: $218.87 (68%)
Cadillac Fleetwood Cylinder Asm,Brake Master
Part Number: 19176108$183.90 MSRP: $346.99You Save: $163.09 (47%)Ships in 1-3 Business Days
Cadillac Fleetwood Brake Master Cylinder
The Brake Master Cylinder in Cadillac Fleetwood automobiles is an imperative part of the braking structure that translates force exerted by the drivers foot in to hydraulic pressure to eventually regulate the SLAVE CYLINDER. This mechanism works by the building up of hydraulic fluid pressure which next releases a caliper or a drum brake to create the friction that is required to halt the vehicle. Most Cadillac Fleetwood models incorporate a dual circuit master cylinder whereby if the fluid in one of the circuits is loss, the other can supply adequate brake pressure. Cadillac Fleetwood has used the following types of brake master cylinders in its products, brake master cylinders with inherent reservoir as well as external reservoir, which has been made of nylon, or other forms of plastics. The major difference between the two types is that the integral reservoirs have only one cap whereas the external reservoirs have thread caps. Service is important, since low fluid levels, leaks or internal problems can affect the brakes and thus shows the relevance of the Brake Master Cylinder in ensuring the Cadillac Fleetwood car's braking, safety and reliability.
Each OEM Cadillac Fleetwood Brake Master Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Cadillac Fleetwood Brake Master Cylinder Parts Questions & Experts Answers
- Q: How do you remove and install the brake master cylinder on Cadillac Fleetwood?A: Before removing and installing the brake master cylinder with reference to the 1996-93 Deville and Fleetwood, the negative battery terminal should be loosened, and using a syringe, as much brake fluid from the brake master cylinder reservoir should be siphoned and the fluid chucked away before tightening the cap. Remove the electrical connector from the FL sensor switch, unbolt the brake lines from the brake master cylinder, and proportioning valves and then plug the ends to minimize fluid leakage. Disconnect the mounting nuts, and pull out the brake master cylinder. Again for installation, locate the brake master cylinder over the top of the power Brake Booster, put and torque the mounting nuts to 20 ft lbs. (27 Nm), connect the brake lines using the fittings which thereafter were tightened to 11/ft lbs. Next release the throttle servo with 15 Nm torque, reconnect the electrical connector and connect the negative cable of the battery. Add brake fluid to the brake master cylinder, and perform all the brake system's bleeding processes. For the 199D-91 Eldorado and Seville, it is stepped in the same way: turn the negative battery cable and the fluid level sensor connector; turn brake line and brake master cylinder. At installation, allow the brake master cylinder to be in proper orientation, tighten the mounting nuts, connect the brake hose, connect the electrical connector, fill the system, and bleed the system. The set of brake pedals of all regular, non-coupe Cadillacs in models from the 1992 to 1998 Eldorado and Seville, as well as the 1994 to 1998 Deville includes a brake master cylinder with a composite construction. Firstly, the operation starts by unscrewing the negative battery cable and the fluid level sensor connector, and then purge the brake fluid from the reservoir. If the bike has an anti-lock brake system, apply the brake and let the hydraulic fluid limp out, remove the connection between the reservoir hose and the braking system, and then cap it appropriately, disposing of the chemical used appropriately. You have to remove the fluid level sensor switch connector and then disconnect the brake lines and then remove the brake master cylinder. If you are changing the brake master cylinder reservoir, then mount the flange in a vise, remove and tap back the spring pins then check the reservoir for damages. For installation, new seal should be cleaned and lubricated; install it and then press the reservoir onto the brake master cylinder and fix it with pins. Lastly, secure the brake master cylinder to the brake pedestal by the nuts, fit the brake hose and electric connector, and then install the brake master cylinder and bleed the brake system as a final stage.
Related Cadillac Fleetwood Parts
Cadillac Fleetwood Brake Booster
Cadillac Fleetwood Brake Proportioning Valve
Cadillac Fleetwood Brake Fluid Level Sensor
Browse by Year
1996 Brake Master Cylinder 1995 Brake Master Cylinder 1994 Brake Master Cylinder 1993 Brake Master Cylinder 1992 Brake Master Cylinder 1991 Brake Master Cylinder 1990 Brake Master Cylinder 1989 Brake Master Cylinder 1988 Brake Master Cylinder 1987 Brake Master Cylinder 1986 Brake Master Cylinder 1985 Brake Master Cylinder 1984 Brake Master Cylinder 1983 Brake Master Cylinder 1982 Brake Master Cylinder