How do you replace the hood latch and release cable on Cadillac Escalade?

To replace the latch, one has to first recall a piece of plastic covering the radiator, he says. Trace the wiring harness towards the latch and if possible, there will be an electrical connector, disconnect the wiring harness from the electrical connector. It is necessary to use scribe or any other convenient tool to mark the location of the hood latch. Take off the bolt on the mounting to unlock the latch assembly, and you need to pull out the cable from the latch. In installation, doing the opposite of a removal process; be free to make some toggling with the latch until the hood closes as it is supposed to. If one wants to replace the release cable, then one must un-lock and then de-couple the release cable from the hood latch assembly. Within the passenger compartment remove the drivers side kick panel to expose the hood latch release cable and handle. Disconnect the cable end from the handle and unscrew cable housing end with a help of the pliers from the tab of the handle. If the handle assembly has to be replaced, then remove this mounting bolt. For truck models, separate fastenings of parking brake pedal assembly so that the cable can be pulled through. At the firewall, there is usually a cable grommet: pull it back together with the cable, within the engine compartment. Disconnect the cable from any plastic clips that may be affixed to it in the region of the engine area. Whilst you are pulling the cable from the passenger compartment you need to ensure that you tie a string or better still an auto mechanic wire to the end of the cable. Secure the string or the wire to the new cable and pass it through the firewall start from the passenger compartment up to the time you get a grommet at the firewall. Insert the grommet into the hole and ensure that it fits in the correct manner onto the hole. To complete the installation, carry out the following which is the reverse of the steps used during removal.

Genuine Cadillac Escalade Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Hood Latches found

View related parts
Cadillac Escalade Latch,Hood Primary
Part Number: 15757371
$81.63 MSRP: $122.04
You Save: $40.41 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: LATCH, Lower Hood; Latch, Lock, Lock Assembly
- Replaces: 16630592
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | 1 TON CREW CAB, 1/2 TON, 3/4 TON, 4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, CREW CAB 1 TON, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, K2500 CREW CAB, K3500 CAB CHASSIS 135.5, K3500 CAB CHASSIS 159.9, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.7L
View related parts
Cadillac Escalade Latch Assembly, Hood Primary
Part Number: 20763454
$144.31 MSRP: $216.73
You Save: $72.42 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: LATCH, Lower Hood; Latch, Lock, Lock Assembly
- Replaces: 25816904, 15139168, 15901322, 15850357, 25793774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | 1/2 TON, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
Cadillac Escalade Latch,Hood Primary
Part Number: 15756432
$57.23 MSRP: $85.57
You Save: $28.34 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: LATCH, Lower Hood; Latch, Lock
- Replaces: 15706108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | 1/2 TON, EXT 1/2 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Cadillac Escalade Latch Assembly, Hood Primary
Part Number: 25816903
$101.71 MSRP: $154.13
You Save: $52.42 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: LATCH, Lower Hood; Latch, Lock, Lock Assembly
- Replaces: 15901321, 15179018
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | 1/2 TON, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
Cadillac Escalade LATCH ASM-HOOD PRIM & SECD
Part Number: 85574818
$67.80 MSRP: $101.37
You Save: $33.57 (34%)
ADD TO CART
Product Specifications
- Other Name: Latch Assembly, Lock, Lock Assembly
- Replaces: 84355610, 84065954, 23159227
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2018 Cadillac Escalade | 1/2 TON, 1500 4 DOOR, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR 1/2 TON | 8 Cyl 6.2L
View related parts
Cadillac Escalade LATCH ASM-HOOD PRIM & SECD
Part Number: 85574828
$56.87 MSRP: $85.02
You Save: $28.15 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 84690209, 84252211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2020 Cadillac Escalade | 1500 4 DOOR, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY | 8 Cyl 6.2L
View related parts
Cadillac Escalade LATCH ASM-HOOD PRIM & SECD
Part Number: 85574821
$50.18 MSRP: $75.02
You Save: $24.84 (34%)
ADD TO CART
Product Specifications
- Other Name: Latch, Lock, Lock Assembly
- Replaces: 22797520, 84460936, 84065951, 84162066, 84355609
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade | 1500 CREW CAB, 1500 CREW CAB STANDARD BOX, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX | 8 Cyl 6.2L
View related parts
Cadillac Escalade LATCH ASM-HOOD PRIM & SECD
Part Number: 85574822
$54.26 MSRP: $82.23
You Save: $27.97 (35%)
ADD TO CART
Product Specifications
- Other Name: Latch, Lock
- Replaces: 22892141, 84065953, 84162067, 84460937, 84355612
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade | 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 REGULAR CAB, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB | 8 Cyl 6.2L
View related parts
Cadillac Escalade Latch Assembly, Hood Prim & Secd
Part Number: 84787836
$56.61 MSRP: $84.63
You Save: $28.02 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
Cadillac Escalade Latch Assembly, Hood Prim & Secd
Part Number: 84805444
$56.61 MSRP: $84.63
You Save: $28.02 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
Cadillac Escalade Latch Assembly, Hood Secondary
Part Number: 15016228
$27.54 MSRP: $37.08
You Save: $9.54 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: LATCH, Upper Hood; Safety Catch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | 4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.7L
View related parts
Cadillac Escalade Latch,Hood Secondary
Part Number: 15016227
Product Specifications
- Other Name: LATCH, Upper Hood; Safety Catch
- Replaces: 15523503, 15009534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | 1 TON CREW CAB, 1/2 TON, 3/4 TON, 4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, CREW CAB 1 TON, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, K2500 CREW CAB, K3500 CAB CHASSIS 135.5, K3500 CAB CHASSIS 159.9, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.7L

Cadillac Escalade Hood Latch

The function that the Hood Latch plays in Cadillac Escalade cars is quite important in that it holds the hood and ensures it does not open during the operation of the vehicle. This component is located below the front part of the hood so important parts such as the engine, radiator and the battery are well protected during use. Perhaps, the years brought some changes to Hood Latch in Cadillac Escalade models themselves, but certain types or styles are unknown. While the concept of operation of the Hood Latch has not changed from the previous model, the emphasis lies in protection of the automobile's components.

Each OEM Cadillac Escalade Hood Latch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Cadillac Escalade Hood Latch Parts Questions & Experts Answers

LATCH ASM-HOOD PRIM & SECD
85574818
Q: How do you replace the hood latch and release cable on Cadillac Escalade?
A: To replace the latch, one has to first recall a piece of plastic covering the radiator, he says. Trace the wiring harness towards the latch and if possible, there will be an electrical connector, disconnect the wiring harness from the electrical connector. It is necessary to use scribe or any other convenient tool to mark the location of the hood latch. Take off the bolt on the mounting to unlock the latch assembly, and you need to pull out the cable from the latch. In installation, doing the opposite of a removal process; be free to make some toggling with the latch until the hood closes as it is supposed to. If one wants to replace the release cable, then one must un-lock and then de-couple the release cable from the hood latch assembly. Within the passenger compartment remove the drivers side kick panel to expose the hood latch release cable and handle. Disconnect the cable end from the handle and unscrew cable housing end with a help of the pliers from the tab of the handle. If the handle assembly has to be replaced, then remove this mounting bolt. For truck models, separate fastenings of parking brake pedal assembly so that the cable can be pulled through. At the firewall, there is usually a cable grommet: pull it back together with the cable, within the engine compartment. Disconnect the cable from any plastic clips that may be affixed to it in the region of the engine area. Whilst you are pulling the cable from the passenger compartment you need to ensure that you tie a string or better still an auto mechanic wire to the end of the cable. Secure the string or the wire to the new cable and pass it through the firewall start from the passenger compartment up to the time you get a grommet at the firewall. Insert the grommet into the hole and ensure that it fits in the correct manner onto the hole. To complete the installation, carry out the following which is the reverse of the steps used during removal.