Q: How to remove the Brake Pad on Cadillac Escalade?
A: To remove the brake assembly, start by removing the cap from the brake fluid reservoir and draining about two-thirds of the fluid. Then, loosen the lug nuts and raise the vehicle, supporting it securely on jackstands. Remove the wheels and inspect the Brake Disc, removing it if necessary. Clean the caliper, caliper bracket, and surrounding area before beginning the installation process. When reinstalling the caliper, ensure that the mounting bolts are tightened to the proper torque specifications, and do the same for the wheel lug nuts. After completing the job, depress the brake pedal a few times until it is firm, and check the brake fluid level, adding more if needed. Break in the new pads by making a few low-speed stops, allowing time for the discs to cool in between. Listen for any unusual noises and visually inspect the brake system for leaks or any components that may not have been properly reinstalled.