My Garage
My Account
Cart
Genuine Cadillac DTS A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Condenser found
Cadillac DTS A/C Condenser
The A/C Condenser in Cadillac DTS plays an important role of a heat exchanger for this gaseous refrigerant and coverts it back to liquid state before it goes into the accumulator. Located mainly at the front side of the vehicle, opposite the radiator, the A/C Condenser is a system of tubes that help in cooling. Though the overview does not seem to classify different types or styles of A/C Condenser used in DTS models, the primary structure and working principal are the same for all the DTS models and are centered on the refrigeration of the condenser. This basic process is very crucial in managing the climate control system to enable the vehicle offer the optimal climate of comfort to the occupants.
Each OEM Cadillac DTS A/C Condenser we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Cadillac DTS A/C Condenser Parts Questions & Experts Answers
- Q: How to remove the Condenser?A: To remove the air conditioning system, start by discharging it and disconnecting the cable from the negative terminal of the battery. If necessary, remove the battery. Drain the cooling system and disconnect the refrigerant lines from the condenser, capping the open fittings to prevent dirt and moisture entry. Remove the radiator and then the condenser by removing the mounting bolts from the condenser brackets. If the original condenser will be reinstalled, store it with the line fittings on top to prevent oil from draining out. To install a new condenser, pour one ounce of refrigerant oil into it before installation. Reinstall all components in the reverse order of removal, ensuring rubber pads are in place under the condenser if applicable. Use new O-rings or flat sealing washers on the refrigerant lines, lubricating the O-rings with clean refrigerant oil. If using a flat sealing washer, ensure it is completely seated against the fitting surface without applying oil. Finally, have the system evacuated, recharged, and leak tested.
