Other Name: TANK, Engine Coolant Recovery; Expansion Tank, Reservoir, Reservoir Tank
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2014-2019 Cadillac CTS | 4 DOOR PERFORMANCE SEDAN, 4 DOOR PLUS SEDAN, 4 DOOR PREMIUM SEDAN, 4 DOOR SEDAN, 4 DOOR V-SERIES SEDAN | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Other Name: TANK, Engine Coolant Recovery; Reservoir, Reservoir Tank
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2015 Cadillac CTS | 2 DOOR COUPE, 4 DOOR, 4 DOOR (RHD), 4 DOOR RHD, 4 DOOR SEDAN, 4 DOOR SEDAN(RHD), 4 DOOR STATION WAGON, 4 DOOR STATION WAGON(RHD), 4 DOOR WAGON, 4 DOOR WAGON(RHD), V 2 DOOR COUPE, V 4 DOOR, V 4 DOOR SEDAN, V 4 DOOR WAGON | 6 Cyl 3.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Q: How do you remove and install a Coolant Reservoir for Cadillac CTS?
A: To remove the cooling system, start by draining it. On 2007 and earlier models, remove the left side cowl panel and disconnect the hoses. If the model has a manual transmission, unbolt the clutch master cylinder reservoir and set it aside. Slide the master cylinder forward without disconnecting the brake lines and position it out of the way. Remove the surge tank mounting fasteners and take out the tank. On 2008 and later models, remove the fasteners securing the coolant reservoir to the fender, lift it up to disconnect the hoses, and disconnect the fluid level sensor if present. Clean the tank with soapy water and a brush to remove any deposits and inspect it for cracks. If a crack is found, replace the reservoir. To install, simply reverse the removal steps.