Other Name: SENSOR, Brake; Clutch Switch, Stoplamp Switch
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2013-2014 Cadillac CTS | 4 DOOR SEDAN(RHD), 4 DOOR WAGON(RHD) | 6 Cyl 3.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
2009-2011 Cadillac CTS | 4 DOOR (RHD), 4 DOOR RHD, 4 DOOR SEDAN(RHD), 4 DOOR STATION WAGON(RHD), 4 DOOR WAGON(RHD) | 6 Cyl 3.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Other Name: SENSOR, Brake; Pedal Travel Sensor, Sensor, Stoplamp Switch
Replaces: 13583370
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2014-2019 Cadillac CTS | 4 DOOR PERFORMANCE SEDAN, 4 DOOR PLUS SEDAN, 4 DOOR PREMIUM SEDAN, 4 DOOR SEDAN, 4 DOOR V-SERIES SEDAN | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Other Name: Sensor Assembly, Brk Ped Posn; Stoplamp Switch
Replaced by: 13549050
Replaces: 25888497
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2015 Cadillac CTS | 2 DOOR COUPE, 4 DOOR, 4 DOOR (RHD), 4 DOOR RHD, 4 DOOR SEDAN, 4 DOOR SEDAN(RHD), 4 DOOR STATION WAGON, 4 DOOR STATION WAGON(RHD), 4 DOOR WAGON, 4 DOOR WAGON(RHD), V 2 DOOR COUPE, V 4 DOOR, V 4 DOOR SEDAN, V 4 DOOR WAGON | 6 Cyl 3.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Q: How do you remove the brake pedal position sensor?
A: To remove the brake light switch, remove the insulation panel and the knee bolster. Disconnect the electrical connector at the switch. Remove the switch mounting fastener and remove the switch from the bracket. Install the switch to the bracket and tighten the switch mounting fastener securely.
Q: How do you remove the Brake Light Switch on 2003 Cadillac CTS?
A: Remove the insulation panel under the knee bolster to replace the brake light switch. Disconnect the electrical connector from the switch. Depress the retaining clip on the switch and pull the switch from the brake pedal. Install the sensor to the pedal, then pull up on the brake pedal and connect the electrical connector.