How to Remove and Reinstall the Blower Motor Resistor/Module, and Blower Motor Assembly for Chevrolet Equinox and GMC Terrain?

To remove the insulator panel, start by disconnecting the electrical connector from the blower motor resistor/module and removing the mounting screws. Next, remove the blower motor fan retaining clip and separate the blower fan. Installation is the reverse of the removal.

Genuine GMC Terrain Blower Motor

A/C Heater Blower Motor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Blower Motors found

View related parts
GMC Terrain Motor Assembly, Blower (W/ Impeller)<See Guide/Contac
Part Number: 22896430
- Other Name: MOTOR, Heater Blower Motor; Blower Motor
- Replaces: 25952810, 15781505
$242.07 MSRP: $508.54
You Save: $266.47 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
Less Info
View related parts
GMC Terrain Motor Assembly, Blo
Part Number: 84674485
- Other Name: Blower Motor
- Replaced by: 85602244
$124.68 MSRP: $261.93
You Save: $137.25 (53%)

Add to Cart
More Info
Fits the following Vehicles:
2020-2021 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLT1, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 2.0L
Less Info
View related parts
GMC Terrain Motor Assembly, Blo
Part Number: 84530595
- Other Name: Blower Motor
- Replaced by: 84727759
$208.94 MSRP: $394.22
You Save: $185.28 (47%)

Add to Cart
More Info
Fits the following Vehicles:
2018-2019 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLT1, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
Less Info

GMC Terrain Blower Motor Parts Questions & Answers

Motor Assembly, Blower (W/ Impeller)<See Guide/Contac
22896430
Q: How to Remove and Reinstall the Blower Motor Resistor/Module, and Blower Motor Assembly for Chevrolet Equinox and GMC Terrain?
A: To remove the insulator panel, start by disconnecting the electrical connector from the blower motor resistor/module and removing the mounting screws. Next, remove the blower motor fan retaining clip and separate the blower fan. Installation is the reverse of the removal.